Simplicity E11570 Snow Blower Manual

The Simplicity E11570 is a powerful snow blower designed for efficient snow removal. It features a 115cc engine, a 24-inch clearing width, and a 20-inch intake height, making it ideal for residential use. The snow blower is equipped with adjustable skid shoes, a 180-degree chute rotation, and an easy-to-use control panel. Below are key sections for safety, features, installation, operation, and troubleshooting.

Features at a Glance

Key components: 115cc engine, 24-inch clearing width, 20-inch intake height, 180-degree chute rotation, adjustable skid shoes.

Installation

Unpack and inspect the snow blower. Ensure all parts are included.

1. Attach the handle: Align and secure with provided bolts.
2. Check oil level: Fill with recommended oil if necessary.
3. Fill fuel tank: Use fresh gasoline for optimal performance.
4. Inspect safety features: Ensure all guards and shields are in place.

WARNING! Always follow safety precautions when handling fuel and operating the machine.

First-Time Setup

Before operating, familiarize yourself with the controls and features.

1. Adjust the chute direction: Use the control lever to set the desired angle.
2. Set the throttle: Adjust to the recommended setting for snow conditions.
3. Test the controls: Ensure all functions operate smoothly before use.

CAUTION! Always perform a safety check before starting the snow blower.

Specifications

• Engine Type: 115cc 4-cycle engine.
• Clearing Width: 24 inches.
• Intake Height: 20 inches.
• Chute Rotation: 180 degrees.
• Weight: Approximately 100 lbs.
• Fuel Capacity: 1.5 gallons.
• Oil Capacity: 0.5 quarts.
• Operating Temperature: -20°F to 40°F.

Controls and Settings

Access controls via the main panel. Key controls include throttle, chute direction, and speed settings.

Throttle: Adjusts engine speed for different snow conditions.

Chute Control: Directs snow discharge to the left or right.

Speed Settings: Select from multiple speeds for optimal performance.

Connecting Devices

No external devices are required for operation. Ensure the snow blower is properly fueled and oiled before use.

Operating Instructions

Follow these steps for effective snow removal:

1. Start the engine: Use the ignition key and set the throttle.
2. Adjust the chute: Set the direction for snow discharge.
3. Begin clearing: Move forward slowly, adjusting speed as necessary.
4. Monitor performance: Check for clogs and adjust settings as needed.

WARNING! Never operate without proper safety gear.

Maintenance

Regular maintenance is essential for optimal performance.

1. Check oil level: Regularly inspect and change oil as needed.
2. Clean the chute: Remove any snow or ice buildup after use.
3. Inspect belts and cables: Ensure all components are in good condition.
4. Store properly: Keep in a dry place during off-season.

Safety Information

Always follow safety guidelines to prevent accidents:

• Wear appropriate clothing and safety gear.
• Keep hands and feet away from moving parts.
• Do not operate in extreme weather conditions.
• Read the manual thoroughly before use.

Troubleshooting

Reset: Follow the manual for resetting any electronic components.

Service: Contact customer support for further assistance.