Simplicity 9560M Snow Blower Manual

The Simplicity 9560M is a powerful snow blower designed for efficient snow removal. With a 24-inch clearing width and a 60V electric start, this machine is perfect for residential use. It features a durable steel construction, adjustable skid shoes, and a 180-degree chute rotation for optimal snow throwing. Below are key sections for safety, features, installation, operation, and troubleshooting.

Features at a Glance

Key components: 24-inch clearing width, electric start, adjustable chute, and durable construction.

Installation

Unpack and inspect contents. Assemble according to the manual.

1. Attach the handle: Align and secure with bolts provided.
2. Check oil levels: Ensure engine oil is filled to the recommended level.
3. Fill fuel tank: Use fresh gasoline as specified in the manual.
4. Inspect all connections: Ensure all parts are secure before operation.

WARNING! Always read the manual before operating the snow blower.

First-Time Setup

Power on the snow blower; follow the setup instructions in the manual.

1. Check controls: Familiarize yourself with all controls and their functions.
2. Adjust chute direction: Set the chute to the desired angle for snow throwing.
3. Test electric start: Ensure the electric start functions correctly.
4. Perform a test run: Operate the snow blower in a safe area to ensure proper functioning.

CAUTION! Ensure the area is clear of obstacles before testing.

Specifications

• Engine: 208cc 4-cycle engine.
• Clearing Width: 24 inches.
• Throwing Distance: Up to 40 feet.
• Fuel Capacity: 1.5 gallons.
• Weight: 200 lbs.
• Start Type: Electric start with recoil backup.
• Transmission: 6 forward and 2 reverse speeds.
• Warranty: 2 years limited warranty.

Controls and Settings

Access controls via the handle: throttle, chute control, and speed settings.

Throttle: Adjusts engine speed for optimal performance.

Chute Control: Rotate and adjust the chute direction.

Speed Settings: Select forward and reverse speeds for different conditions.

Connecting Devices

Ensure all connections are secure before operation.

1. Check fuel and oil levels before starting.
2. Ensure the electric start is plugged in if applicable.
3. Inspect all cables and connections for wear.

Tip: Always perform a safety check before use.

Operating the Snow Blower

Follow these steps for safe operation:

1. Start the engine: Use the electric start or recoil if necessary.
2. Adjust speed: Set the appropriate speed for the snow conditions.
3. Direct the chute: Aim the chute away from people and obstacles.
4. Clear snow: Move forward steadily, allowing the snow blower to do the work.

WARNING! Never operate the snow blower in reverse unless necessary.

Maintenance

Regular maintenance is essential for optimal performance.

1. Check oil levels: Change oil after every 50 hours of use.
2. Inspect the spark plug: Replace if worn or damaged.
3. Clean the chute: Remove any snow or debris after use.
4. Store properly: Keep in a dry place during off-season.

CAUTION! Always disconnect the spark plug before performing maintenance.

Safety Information

Always prioritize safety when operating the snow blower.

• Wear appropriate clothing and safety gear.
• Keep hands and feet away from moving parts.
• Do not operate in enclosed spaces.
• Read the manual thoroughly before use.

Troubleshooting

Reset: Follow the manual for resetting the system if necessary.

Service: Contact your local dealer for assistance.