Simplicity 7555EX Snow Blower Manual

The Simplicity 7555EX is a powerful snow blower designed for efficient snow removal. With a 27-inch clearing width and a 5-speed forward and 2-speed reverse transmission, it provides excellent maneuverability and performance in heavy snow conditions. Equipped with a 305cc engine, it features electric start, heated hand grips, and an adjustable chute for optimal snow throwing direction. Below are key sections for safety, features, installation, operation, and troubleshooting.

Features at a Glance

Key components: 27-inch clearing width, 305cc engine, electric start, heated hand grips, adjustable chute.

Installation

Unpack and inspect contents. Assemble the snow blower according to the manual.

1. Attach the handlebar: Use the provided bolts to secure the handlebar to the main frame.
2. Check oil levels: Ensure the engine oil is filled to the recommended level.
3. Fill fuel tank: Use fresh gasoline to fill the tank.
4. Inspect safety features: Ensure all safety guards are in place.

WARNING! Always follow safety precautions during assembly and operation.

First-Time Setup

Power on the snow blower; follow the setup instructions in the manual.

1. Adjust the chute direction: Set the chute to the desired angle before starting.
2. Test controls: Ensure all controls are functioning properly.
3. Check for loose parts: Inspect all bolts and screws for tightness.

CAUTION! Ensure the area is clear of obstacles before starting.

Specifications

• Model: Simplicity 7555EX
• Engine: 305cc, 4-cycle
• Clearing Width: 27 inches
• Transmission: 5-speed forward, 2-speed reverse
• Weight: 200 lbs
• Fuel Capacity: 3 gallons
• Oil Capacity: 1.5 quarts
• Starting System: Electric start

Controls and Settings

Access controls via the handlebar: throttle, chute control, and ignition switch.

Throttle: Adjusts engine speed for optimal performance.

Chute Control: Adjusts the direction of snow discharge.

Ignition Switch: Powers the engine on and off.

Connecting Devices

No external devices are required for operation.

1. Ensure all connections are secure before starting.
2. Check fuel and oil levels regularly.

Tip: Always operate in a well-ventilated area.

Operating Instructions

Follow these steps for safe operation:

1. Start the engine using the electric start.
2. Adjust throttle and chute as needed.
3. Clear snow in a systematic pattern for best results.
4. Shut off the engine when finished and perform maintenance checks.

WARNING! Do not operate without proper safety gear.

Maintenance

Regular maintenance is essential for optimal performance.

1. Check and change oil regularly.
2. Inspect and clean the air filter.
3. Sharpen or replace the auger blades as needed.
4. Store in a dry place during off-season.

Care & Cleaning

Unplug and clean the snow blower after each use. Use a dry cloth; avoid liquids.

CAUTION! Do not spray water on the engine or electrical components.

Regulatory Information

This snow blower complies with all applicable safety standards. For support, visit the manufacturer's website or contact customer service.

Troubleshooting

Reset: Refer to the manual for reset procedures if applicable.

Service: Contact customer service for further assistance.